How do you remove the oem heatsink from a radeon video card? - radeon video card drivers
The fan has been dying to make since the noise (lately, it was a relief when I realized it was not) my hard drive. Sometimes when I start the layout, no graphics card fan does not start, even if I give a kick in the chat! I read that it is a common problem with the Radeon small black fan, so I want it with a model after the sale, there are many available to replace, but the heat is there, down, damn tight I hesitate, cuz too much pressure I do not want to quantify the damage to the motherboard. Suggestions?
Friday, January 8, 2010
Radeon Video Card Drivers How Do You Remove The Oem Heatsink From A Radeon Video Card?
4 comments:
Use a hair dryer to heat radiators OEM
I made a couple of times (9-X-800XT and 800XT PE by following the instructions supplied with parts of the Arctic cooling.
No need to burn the fingers, but if you feel it (really hot), the fridge is to be removed easily.
Refrigerators are often attached to the graphics card with two to four screws. to solve very easily and will not set back with great force, either.
The graphics card requires a PCI slot. If not, then it means that your video card is integrated on the motherboard. They are integrated on the motherboard, I draw all the energy that connect the graphics card and buy a new graphics card.
- Make sure you open the screw (DUH) prefer to try again Theen ..
Submit the card to buy his hometown team, and ask the technician to do it for you (preferebly the store where you buy the new fan)
Be sure to remove all the screws. You connect the computer and boot the system. The aim is your ticket to cold / hot enough to soften the transition between the heatsink and processor. Start a 3D game for a few minutes. Turn off the computer, remove the card and never try above all to draw the cooler away! that the chip could be damaged. try to slowly but firmly press the heatsink enough to break the paste between the chip and the heatsink. That should do it.
Post a Comment